Tag Archives: Block

Low Ankle Strap Heel – Wide Strap Block Heel – Round Toe Dress Shoe – Comfortable Trendy Strappy Low Heel – Darling by J. Adams

Low Ankle Strap Heel - Wide Strap Block Heel - Round Toe Dress Shoe - Comfortable Trendy Strappy Low Heel - Darling by J. Adams

  • LOOK FRESH: Update your pumps with a delicate ankle strap and a block heel! Wear these to work for a professional look but also look cute after hours with the rounded toe and ankle strap
  • STYLISH ANKLE STRAP FOR A SECURE FIT: Featuring a cute strap that hugs your ankle for custom support and provides a comfort throughout wear. Your feet will not slip, turn or move out of place while wearing these gorgeous heels!
  • EARTH CONSCIOUS: These peep toe sandals are made from 100% vegan leather. This amazing pair makes it so easy to keep up with the most current fashion trends - yet remain environmentally conscious!
  • MEASUREMENTS: approx. Heel height 2.5". True to size Fit.
Featuring a cute strap that hugs your ankle for custom support and provides a comfort throughout wear. Your feet will not slip, turn or move out of place while wearing these gorgeous heels! Darling by J. Adams are the best choice for any occasion!

Price:

Find More Dress Sandals For Wide Feet Products

Fashion Thirsty Womens Mid Block Heel Mary Jane Office Work Formal Strap Dolly Pumps Shoes Size 5

Fashion Thirsty Womens Mid Block Heel Mary Jane Office Work Formal Strap Dolly Pumps Shoes Size 5

  • Gorgeous Mary Jane Shoes
  • Approx Heel Height of 2.7 Inches / 6.8 cm
  • Approx Platform Height: 0.1 Inches / 0.3 cm
  • Buckle Fastening - Chunky Heel
  • Please Order Usual US Size But Note That This Item Will Be Labelled with Corresponding UK or EU Size - E.G. US 5 = UK 3, US 6 = UK 4, US 7 = UK 5, US 8 = UK 6, US 9 = UK 7, US 10 = UK 8 and so forth..
Fashion Thirsty¨ branded products are only available exclusively through Fashion Thirsty

List Price: $ 19.99 Price: $ 19.99

Related Women’s Shoes Size 5 Products

PUMA – Kids Babys Infant Color Block Tricot Set, Quiet Shade, 24 Months

PUMA Kids Babys Color Block Tricot Set, Quiet Shade, 24 Months

  • Two-piece set featuring long-sleeve zip-front jacket and pant with elasticized waist
  • Contrast taping stripe on sleeves
  • Embroidered logo at chest and leg
PUMA COLOR BLOCK TRICOT SET

List Price: $ 48.00 Price:

Related Kids’ Clothing Products

Brondell H2O+ Cypress Carbon Block Water Filter (HF-33) Reviews

Brondell H2O+ Cypress Carbon Block Water Filter (HF-33)

  • Quick connect for easy filter replacement for Brondell Cypress (H630) water filtration system
  • Reduces harmful volatile organic compounds (VOCs) & 98% reduction of Aesthetic Chlorine
  • Third stage of a 3-stage filtration system
  • Low cost maintenance, 6 month filter
  • Tested and certified by WQA (Water Quality Association)
The Brondell H2O+ Cypress Carbon Block filter (HF-33) is the final stage in the advanced Cypress filtration system. The Carbon Block filter further reduces particulates, bad tastes and odors, and water contaminants such as chlorine and harmful volatile organic compounds (VOC's), improving the taste of the dispensed water. The HF-33 filter significantly reduces harmful chemicals like Atrazine; Chlorobenzene; Trihalomethanes; Methoxychlor; Endrin; 2,4-D; Benzine; DBCP and 98% of Aesthetic Chlorine from your tap water for a healthier home and family. Choose Brondell H2O+ for better water. The 3-stage H2O+ Cypress H630 water filtration system:* Stage 1: COMPOSITE PLUS FILTER (HF-31): This 2-step filter reduces particulate materials such as sand, rust, and fine particles from the water supply. This first filter also acts as a pre-filter protecting the 2 following filters. Recommended replacement every 6 months. Stage 2: NANOTRAP FILTER (HF-32): This specialized, patented, innovative Nanotechnology filter is made with 100% USA sourced materials including Nano alumina & cellulose fibers with a pore size of 2 micron (2 µm) that reduce turbidity, harmful waterborne microorganisms (including many bacteria and virus) as well as numerous particulates. Recommended replacement every 12 months. Stage 3: CARBON BLOCK FILTER (HF-33): As the final stage in the filtration process, the Carbon Block filter further reduces particulates, bad tastes and odors, and water contaminants such as chlorine and volatile organic compounds (VOC's), improving the taste of the dispensed water. Recommended replacement every 6 months. The HF-33 filter when used with the H630 system is tested and certified by WQA to NSF/ANSI Standards 42 for Aesthetic Chlorine, taste and odor, Particulate Class 1 and 53 for VOC reduction. Do not use with water that is microbiologically unsafe or unknown quality without adequate disinfection before or after the system.

List Price: $ 50.00 Price: $ 29.92

Find More Brita Replacement Products

Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4″ x 2-7/8″, 0.5 Micron

Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron

  • Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water
  • Nominal filtration rating of 0.5 micron
  • Bonded PAC media with polyolefin wraps and polyethylene netting
  • Initial pressure drop of 3.7 psi at a flow rate of 2 gpm
  • Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)

This Pentek CBC-10 carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 20,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 3.7 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for purification of residential and commercial drinking water.

Specifications

Nominal filtration rating0.5 micron
Initial pressure drop at 2 gpm3.7 psi
Removal of protozoan cysts99.95%
Chlorine reduction capacity20,000 gallons at 2 gpm
Temperature range40 to 180 degrees F (4.4 to 82.2 degrees C)
Maximum dimensions (H x W)9-3/4 x 2-7/8 inches (248 x 73 mm)
Materials certificationNSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

List Price: $ 9.07 Price: $ 9.07

Find More Reduces Chlorine Products

Pentek EP-20BB Carbon Block Filter Cartridge, 20″ x 4-5/8″, 5 Microns

Pentek EP-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 5 Microns

  • Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
  • Nominal filtration rating of 5 microns
  • Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
  • Initial pressure drop of 5.5 psi at a flow rate of 5 gpm
  • Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)

This Pentek EP-20BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 40,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 5.5 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Specifications

Nominal filtration rating5 microns
Initial pressure drop at 5 gpm5.5 psi
Chlorine reduction capacity40,000 gallons at 4 gpm
Temperature range40 to 180 degrees F (4.4 to 82.2 degrees C)
Maximum dimensions (H x W)20 x 4-5/8 inches (508 x 118 mm)
Materials certificationNSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

List Price: $ 62.83 Price: $ 45.27

Find More Carbon Filter Products

Cook N Home 15-Piece Cutlery Set with Storage Block

Cook N Home 15-Piece Knife Set with Wooden Storage Block, Stainless Steel

  • Includes: 8 in. chef's, 8 in. bread, 8 in slicer, 6.5 in. santoku, 5 in. utility, 3.5 in. paring, 3 in. peeler, six 4.5 in. steak knives, kitchen scissors, and a wood storage block
  • Knives are made of high carbon stainless steel for sharpness and balance
  • Full tang construction with 3 rivets provides durability; Block holds all knives
  • Handle is ergonomically designed for comfort and Bakelite handle is hygienic
  • Steak knives and bread knife are serrated for easy slicing; Not dishwasher safe
The Cook N Home 15-Piece Knife Set with Wooden Storage Block, Stainless Steel includes: 8 in. chef’s knife, 8 in. bread knife, 8 in slicer, 6.5 in. santoku knife, 5 in. utility knife, 3.5 in. paring knife, 3 in. peeler knife, six 4.5 in. steak knives, kitchen scissors, and a wood storage block. Knives are made of high carbon stainless steel for sharpness and balance. Full tang construction with 3 rivets provides durability. Wood block included to hold all knives. Handle is ergonomically designed for comfort and Bakelite handle is hygienic. Steak knives and bread knife are serrated for easy slicing. Not dishwasher safe.

List Price: $ 29.99 Price: $ 24.99


Fox Run Brands 44516 Non-Stick French Fry Pan, 39 by 34 by 2.7cm

  • Overall dimensions: approx. 13 x 15 x 1 inch, Cooking area: 12 x 12 inch
  • Constructed of durable carbon steel with a premium non-stick coating
  • Features a perforated surface, allows air flow below food for complete and even baking
  • Perfect for making delicious, crispy fries and other finger foods
  • No need to flip or turn over food halfway through cook time
Tired of soggy french fries? Do you crave crispiness? This pan is specially made to transform the way your fries are cooked in the oven. The perforated surface of this pan allows maximum heat to the bottom of the pan, while allowing air to circulate and steam to escape so that foods brown on top and bottom. No need to stop halfway through cook time to flip or turn over your food! Made of carbon steel with a premium non-stick finish, your french fries and other finger foods will release nicely and easily. For delicious, crispy fries, bake Fox Run.

Price: $ 54.95

Related Premium Carbon Products

Watts Premier 560088 Lead, Cyst, VOC Carbon Block Two Stage Replacement Filter Pack

Watts Premier 560088 Lead, Cyst, VOC Carbon Block Two Stage Replacement Filter Pack

  • Replacement filters with water filtration system can save over 4,500 half liter bottles per filter
  • Reduce environmental impact of filter, certified for 600 gallons
  • Specially formulated carbon block NSF certified for the reduction of lead, cryptosporidium, giardia, and entamoeba
  • Also certified for harmful volatile organic chemicals such as herbicides, pesticides, insecticides, and more
  • Fits all standard under counter and counter top filtration systems
Watts WP-2 LCV replacement filter pack includes one 5 micron sediment pre filter and one 1 micron lead, cyst and chemical reducing carbon block.

List Price: $ 16.25 Price: $ 12.35

Related Carbon Filter Products

Watts 202000 10-Inch 5-Micron for Multi-Cartridge Whole House Water Filter with Solid Block Activated Carbon Reviews

Watts 202000 10-Inch 5-Micron for Multi-Cartridge Whole House Water Filter with Solid Block Activated Carbon

  • 3,000 Gallon capacity
  • Standard 2-7/8-inch OD x 9-3/4-inch Length
  • Low pressure drop makes it ideal for whole house or areas where higher flow carbon block filtration is needed
  • Reduces chlorine taste and odor
  • Meets all plumbing codes
Economical, thick wall carbon block cartridges for long life and increased chlorine taste and odor reduction. Reduces: Chlorine Taste and Odor, Sediment and Rust Particles. Cartridge is manufactured using a patented process that yields a cartridge with a nominal 5 micron filtration rating, high porosity and greater chlorine taste and odor removal capacity than standard 5 micron carbon blocks.

List Price: $ 11.50 Price: $ 6.38

Related Carbon Filter Products

KX MATRIKX Pb1 10-Inch Length Extruded Carbon Block Filter Cartridge, 1-Pack

KX MATRIKX Pb1 10-Inch Length Extruded Carbon Block Filter Cartridge, 1-Pack

  • Lead, Cyst and Turbidity Reduction Based on NSF/ANSI Standard 53
  • Outstanding Chlorine Taste and Odor Reduction Based on NSF/ANSI Standard 42
  • Graded-density filtration + high dirt holding capacity. Photo is of EXACT item
  • Extruded activated carbon provides several times greater life than molded filters. MADE IN USA
The MATRIKX Pb1 is a powerful, multifunctional filter cartridge for residential and commercial water treatment systems. MATRIKX Pb1 extruded activated carbon filters reduce soluble lead using an ion-exchange medium with high specificity for soluble lead. Particulate filtration is used to intercept insoluble lead-containing particles. Standard 10" Length (9.75" Actual) X 2.50" Diam. filters will reduce lead, meeting the performance requirements of NSF/ANSI Standard 53 protocol for over 2,500 gallons when operating at a flow rate of 0.75 GPM. Manufactured with KX's proprietary extrusion process, MATRIKX Pb1 filters offer high levels of chemical reduction in potable drinking water, including chlorine taste and odor. MATRIKX Pb1 filters meet NSF/ANSI Standard 53, Turbidity and Cyst Reduction, including Cryptosporidium, Giardia, Entamoeba and Toxoplasma. Service life of the MATRIKX Pb1 filter is greatly extended by a prefiltration medium. Projected chlorine taste and odor reduction capacity when tested in accordance with NSF/ANSI Standard 42 protocol. Nominal particulate rating (0.5 m) is for >85% of a given size as determined from single-pass particle counting results. Absolute particulate rating (1 m) is for >99.9% of particles of a given size as determined from single-pass particle counting results. Nominal Filter Rating: Filter rating indicating the approximate size particle, the majority of which will not pass through the filter. It is generally interpreted as meaning that 85% of the particles of the size equal to the nominal micron rating will be retained by the filter. Absolute Filter Rating: Filter rating meaning that 99.9% (or essentially all) of the particles larger than a specific micron rating will be trapped on or within the filter. No channeling; No bypassing; Maximum service life and resistance to fouling; Graded density pre-filtration design; Manufactured using FDA-compliant materials; Color coded, molded, one-piece gasket and end cap. MADE IN USA.

List Price: $ 20.00 Price: $ 11.99

More Carbon Filter Products